Academic Year 2018-2019  

  • Title :- Application of Gray Level Co-occurrence Matrix as a feature extraction technique to monitor wear of cutting tool
    Paper:- presented and published
    Level :- international

    By: mr. prashant ambadekar
    Organizer :- EQUINOX 2018: 4th International Conference on Engineering Confluence at Terna College of Engineering
    Venue :- Terna College of Engineering
    Date: 27/09/2019

    The traditional methods make use of sensors to monitor the wear of a cutting tool. The application of digital image processing in determining tool wear is gaining importance. GLCM is the most widely used higher order statistical technique for feature extraction to monitor tool wear. Contrast and homogeneity has been proved as the two best texture descriptors of GLCM. The accuracy of GLCM largely depends on the orientation of the pixels considered to obtain these descriptors. This paper presents the effect of varying pixel pair spacing (pps) and pixel pair direction (ppd) on contrast and homogeneity. An attempt is made to provide one of the solutions to consider the orientation of the pixels while computing GLCM.


  • Title :- Stress analysis of type-II trochanteric fracture femer bone implantation with prosthetic plate and screws using finite element method
    Paper:- presented
    Level :- international

    By: prof. chandan chaudhari
    Organizer :- ICESTMM"19
    Venue :- Mumbai
    Date: 14/06/2019

    The use of finite element method (FEM) has grown to a more importance in the field of biomedical engineering. Although increased computational performance allow us to create more complex geometries in the field of orthopedic surgery. These computational methods help us to explore effect of various bio- materials on the sub-trochanteric fracture femur bone. In this study the type II sub trochanteric femur bone were modeled based on the dimensions. The femur bone is longest and strongest bone in the human body. It needs to support maximum weight of the body in between hip joint and knee joint. The femur bone contained linear elastic, isotropic, homogeneous material of calcium phosphate. The main objective of this study is to rectify the behavior of sub-trochanteric fracture femur bone for a man of age 48 years with prosthetic bone plate and screws under compression loading condition. Results were analyzed on the prosthetic plates and screws for Type II sub-trochanteric fracture femur bone i.e. (The fracture is within 2.5 cm of the lesser trochanter) during static loading condition with different bio materials. The comparison was made with various screws and plates made by various bio-materials which concluded in the implementation of the materials having minimum Von-misses stress, deformation of the fractured femur bone. On the basis of the results obtained, an alternative grade is examined and comparison has been made with the existing grade of titanium.


  • Title :- Intelligent Hiring with Facial Expression Detection and Report Generation
    Paper:- presented and published
    Level :- international

    By: ms. kalyani pampattiwar
    Organizer :- Journal of Applied Science and Computations(JASC)
    Venue :- New Delhi
    Date: 01/05/2019

    €Intelligent Hiring with Facial Expression Detection and Report Generation”, JASC, Volume VI, Issue V, May/2019, ISSN NO: 1076-5131


  • Title :- THE NEXTGEN BOT
    Paper:- presented and published
    Level :- international

    By: ms. kalyani pampattiwar
    Organizer :- Journal of Applied Science and Computations(JASC)
    Venue :- New Delhi
    Date: 01/04/2019

    €THE NEXTGEN BOT” JASC, Volume VI, Issue IV, April/2019, ISSN NO: 1076-5131, Page No:3661


  • Title :- Enhancing manufacturing of semi-conductors by predicting potential performance using an intelligent system.
    Paper:- presented and published
    Level :- international

    By: dr. pradip patil
    Organizer :- Guru Nanak Institutions, Hydrabad, Telangana, India.
    Venue :- rd International Conference On Innovations In Mechanical Engineering,GNI
    Date: 10/01/2019

    A modern manufacturing process is normally under constant surveillance by monitoring the variable and signals (if any) collected from process estimation points and sensors. However, all of these signals may not be useful in monitoring a specific system. The measured signals contain a combination of useful information, irrelevant information as well as some amount of noise. Very often, we find that useful information is buried in the latter two. Engineers typically have a much larger number of signals than are actually required. If we consider each type of signal as a feature, then dimension reduction/feature selection may be applied to identify the most relevant signals. In this paper, we will see how we can determine whether semi-conductors will pass or fail in a house line test, by extracting the most important features obtained during the manufacturing of the semi-conductors, and then evaluating their performance. This will enable an increase in process throughput, decreased time to learning, and reduce the per unit production costs.


  • Title :- Critical study of Tool Condition Monitoring Related to Sensor and Image Processing based methods
    Paper:- presented
    Level :- international

    By: mr. prashant ambadekar
    Organizer :- 4th International Conference on Production and Industrial Engineering, CPIE - 2016 at NIT Jalandhar
    Venue :- NIT Jalandhar
    Date: 21/12/2018

    The aim of tool condition monitoring is to keep surveillance on the cutting tool during machining. TCM is becoming increasingly important as it influence the process economy and quality of machined part. This paper presents the overview of various techniques for data acquisition, data processing and classification techniques reported in the literature for tool condition monitoring. The monitoring methods may use sensors or vision system to acquire signal from the process. More emphasis is given on image processing based monitoring techniques than sensors based techniques that are less accurate. The integration of sensor and image processing based techniques are elaborated as novel work in this paper. The work also provides a platform for researchers who wish to execute their study in the area of TCM.


  • Title :- Application of Gabor Filter for Monitoring Wear of Single Point Cutting Tool
    Paper:- presented and published
    Level :- international

    By: mr. prashant ambadekar
    Organizer :- rtip2r2018: The Second International Conference on Recent Trends in Image Processing & Pattern Recognition at Solapur University
    Venue :- Solapur University, Solapur
    Date: 21/12/2018

    Tremendous use of sophisticated computer aided manufacturing systems necessitates monitoring of tools. Monitoring of tools facilitates to reduce machine tool downtime, increases quality of the product, provide better surface finish and reduces cost. Sophisticated digital image processing algorithms and availability of high resolution cameras has enabled automated monitoring of tools. To exactly predict the tool wear is a challenging task due to its complexity involved in the algorithm that facilitates extraction of features. In this paper, tool wear monitoring through texture feature extraction using Gabor filter is presented. Gabor filter has demonstrated better multi-resolution properties that facilitate texture feature extraction. Statistical parameters such mean, standard deviation, variance, skew and kurtosis are calculated to measure the tool wear. Experimental results demonstrate better tool wear prediction as compared to other algorithms.


  • Title :- Evaluation of Metal Scrap based Composites
    Paper:- presented and published
    Level :- international

    By: mr. ganesh kadam
    Organizer :- Techno Societal - SVERI's COE Pandharpur
    Venue :- SVERI’s College of Engineering Pandharpur, Solapur
    Date: 14/12/2018

    Ganesh S. Kadam, Swapnil T. Firake, Evaluation of Metal Scrap based Composites, Proceedings (Springer) of 2nd International Conference on Advanced Technologies for Societal Applications (2018) – Techno-Societal 2018, 14-15th December 2018, SVERI’s College of Engineering Pandharpur, Solapur, Maharashtra, India.


  • Title :- Technology Enhanced Learning (TEL) Environment to Develop Expansionist-Reductionist (ER) Thinking Skills through Software Design Problem Solving.
    Paper:- presented and published
    Level :- international

    By: dr. deepti patil
    Organizer :- IIT Madras
    Venue :- IIT Madras
    Date: 13/12/2018

    IEEE Tenth International Conference on Technology for Education (T4E), 2018.


  • Title :- A smart and prognostic approach to park vehicles using IOT
    Paper:- presented
    Level :- international

    By: ms. masooda mohamed modak
    Organizer :- JASC
    Venue :- INDIA
    Date: 01/12/2018

    IOT based Appliation


  • Title :- A smart and prognostic approach to park vehicles using IOT
    Paper:- presented and published
    Level :- international

    By: ms. kalyani pampattiwar
    Organizer :- Journal of Applied Science and Computations(JASC)
    Venue :- New Delhi
    Date: 01/12/2018

    € A smart and prognostic approach to park vehicles using IOT”, JASC, Volume V, Issue XII, Dec 2018, DOI: 16.10089/JASC


  • Title :- "Exploiting Lean-Green-Six Sigma Strategies for Competitive Advantage”
    Paper:- presented and published
    Level :- national

    By: prof. lokpriya gaikwad
    Organizer :- NITIE., Mumbai
    Venue :- NITIE., Mumbai
    Date: 30/11/2018

    Exploiting Lean-Green-Six Sigma manufacturing practices that help to the manufacturing organization for Competitive Advantage.


  • Title :- Smart Intelligent system for Women and Child security
    Paper:- presented and published
    Level :- international

    By: mr. sunil punjabi
    Organizer :-
    Venue :- Vancouver, BC, Canada
    Date: 03/11/2018

    Presented and published paper "Smart Intelligent system for Women and Child security" IEEE 9th Annual Information Technology, Electronics, and Mobile communication Conference, 1-3 Nov 2018 at Vancouver, BC, Canada.


  • Title :- Smart Intelligent system for Women and Child security
    Paper:- presented and published
    Level :- international

    By: ms. suvarna chaure
    Organizer :-
    Venue :- Canada
    Date: 01/11/2018

    IEEE 9th Annual Information Technology, Electronics, and Mobile communication Conference at Vancouver, BC, Canada.


  • Title :- Lean - Green - Six Sigma approach in global manufacturing using Industry 4.0”
    Paper:- presented and published
    Level :- international

    By: prof. lokpriya gaikwad
    Organizer :- IIIE
    Venue :- Bhubaneshwar, India
    Date: 27/09/2018

    Presented an integrated Lean - Green - Six Sigma approach in global manufacturing using Industry 4.0 in current scenario.


  • Title :- Role of Lean Manufacturing practices in Greener production: A way to reach Sustainability
    Paper:- presented and published
    Level :- international

    By: prof. lokpriya gaikwad
    Organizer :- IIIE
    Venue :- Bhubaneshwar, India
    Date: 27/09/2018

    Role of Lean Manufacturing practices in Greener production to attain the organizational goal of sustainability.


  • Title :- Improving quality of service of WSN network by dada Aggrigation
    Paper:- presented and published
    Level :- international

    By: ms. priyanka kadam
    Organizer :- 4th International Conference On Engineering Confluence & Inauguration of Lotfi Zadeh Center of Excellence in Health Science And Technology (LZCODE) – EQUINOX 2018
    Venue :- Terna Engineering college, Nerul
    Date: 26/09/2018

    Data aggregation is a very crucial technique in WSNs. Data aggregation helps in reducing the energy consumption by eliminating redundancy. Currently, most of the existing works focus on constructing DATs according to different user requirements under the Deterministic Network Model (DNM).due to the existence of many probabilistic lossy links in WSNs so the current work which spend lots of efforts on aggregation, so we mainly focus on DAT construction problem. The proposed, we focus on constructing a LoadBalanced Data Aggregation Tree (LBDAT) under the PNM, we define two new metrics potential load, and actual load. First we identify MIS(Independent nodes with respect to the root node) and connected MIS (Connecting Nodes). Finally, we calculate Load-Balanced Parent Node Assignment (LBPNA) structure by identifying links to be used across neighbouring nodes. The tree structure identified here will be utilized for communication across the leaf and root node of the network.


  • Title :- Kinematic Synthesis of Overlay Welding Station Of Elbow
    Paper:- presented and published
    Level :- international

    By: dr. pradip patil
    Organizer :- Terna college of Engineering
    Venue :- Terna college of Engineering
    Date: 26/09/2018

    The purpose of this paper is to find the trajectory of serial manipulator for clad welding for an inside surface of an elbow.


  • Title :- A survey of non local means image denoising technique and its variants
    Paper:- presented and published
    Level :- international

    By: ms. swati rane
    Organizer :-
    Venue :- NIE Institute of Technology, Mysore, Karnataka
    Date: 21/09/2018

    International Conference on Innovations in Engineering , Technology and Sciences


  • Title :- An IOT Based System for Water Quality Monitoring
    Paper:- presented
    Level :- international

    By: mrs. pranita mahajan
    Organizer :- IEEE Chennai Chapter
    Venue :- GRT Institute of Engineering and Technology, Chennai
    Date: 07/09/2018

    Potable water quality is important socioeconomic aspects. Many researchers developed various systems to ensure clean drinking water. The traditional system works by manually collecting the samples; manually analysis is done in laboratory causing delay and manual errors. Existing systems may reduce the errors but incur delay as analysis is not done at user site. A system is needed which will dynamically monitor and ensure water quality to users. Proposed system has various sensors to check and ensure water quality such as pH, temperature, conductivity, turbidity, ORP, Nitrate and free residual chlorine. Data is collected through sensors and send for further processing. LEDs deployed on the system are for general users to immediately identify about the quality of the water. The system aims to reduce the delay in existing systems by deploying indictors on system itself so that the person using the system will be able to decide whether water is safe to drink or not, which can avoid further health hazards. Implemented system is economical and dynamic in nature. Use of LEDs on system makes it user friendly and even common people can assure quality of water. System is specially designed for public places like schools and colleges


  • Title :- Kinematic Synthesis of Overlay Welding Station Of Elbow
    Paper:- presented
    Level :- international

    By: dr. rupendra nehete
    Organizer :- Terna Engineering College, Navi Mumbai
    Venue :- Terna Engineering College, Navi Mumbai
    Date: 26/08/2018

    EQUINOX 2018-4th INTERNATIONAL CONFERENCE ON ENGINEERING CONFLUENCE, TPCT's


  • Title :- Real Time Pothole Detection Using Android Smartphone And IOT Based Approach
    Paper:- presented
    Level :- international

    By: dr. rizwana shaikh
    Organizer :-
    Venue :- online
    Date: 28/01/2018

    IEEE International Conference On Electrical, Electronics, Computers, Communication


  • Title :- Public auditing for shared data in cloud storage with an effective user dismissal
    Paper:- presented and published
    Level :- international

    By: mrs. samundiswary srinivasan
    Organizer :- Dept of E & TC Engineering,DBATU
    Venue :- Dr.Babasaheb Ambedkar Technology University,Lonere-maharashtra
    Date: 06/01/2018

    Cloud computing security-pucblic auditing